The Underfloor Heating Cable X-Cable is suitable for providing energy-efficient indoor underfloor heating and can be installed under almost any floor coverings.It will be safe to use inboth dry and wet locations.The X-Cable heats up through the inner conductor. It cannot be cut in any situation because the length and the output of the constant wattage cable are determinated.The outside diameter of the X-CABLE is 5.0 mm and rated at 20w/m. It provide a reliable and effective underfloor heating system.
UTH-Cable Twin Conductor Underfloor Heating Cable can be used for ceramic tiles , natural stone and wooden floor etc. It's also suitable for either primary or secondary heat.
The heating cable are the ideal solution for those complicated floor areas where a mat is not suitable. The outside diameter of the UTH-CABLE PRO is only 2.0 mm. It is very thin and very easy for installation. The UTH Cables PRO are rated at 12W/m or 15W/m and supplied as a cable on a roll. Since it is a loose floor heating cable, there is no fixed cable space, you can change the wattage/sqm by adjusting the cable spacing within the range we suggest.
X-Cable-Pro is designed to provide flexible heating options for both indoor floor heating and outdoor concrete frost protection.Since it is a loose floor heating cable, there is no fixed cable space. So you can change the wattage/sqm by adjusting the cable spacing.
+86 17755169974
info@jhheat.com
English
Deutsch
русский
español
Polski
suomalainen
network supported